Bluetooth Controller for Bluewater Push Button Switches - Control up to 4 Functions

This control box is paired with a transmitter that is operated entirely by bluetooth. The transmitter will work up to 30 ft. away from the control box, The transmitter will operate drive trim, trim tabs or any other momentary switch application. DOES NOT includes switches

The switch transmitter requires a 12 volt power source and the draw is less than 5 amps. Each transmitter input is activated using +12 volts so they are compatible with any type of switch, including Bluewater. The Controller also requires a 12 volt power source with a maximum draw of up to 10 amps per switched load. Switched loads greater than 10 amps will require an external relay. Each switched output will change to + 12 volts when activated. Please note that the enclosures are not waterproof or ignition protected.

Each controller and transmitter pair have matching serial numbers so they must be kept together. The pairing uses an encrypted code and cannot be undone, or hijacked in the field. If a system requires repair we will need both the controller and the switch transmitter returned to MDC. Also, you can install as many of these systems in a single boat as you want, they will all operate independently and will not interfere with each other.

Steering Wheel Mounted Trim Switch, Carbon Fiber Top Plate, Bluetooth Operation, Aircraft Switches

This control box is paired with a switch that is operated entirely by Bluetooth. The switch will work up to 30 ft. away from the control box, The switch will operate drive trim, trim tabs or any other momentary switch application. DOES NOT include a mounting plate. This model contains aviation quality control switches and a carbon fiber top plate. Each switch pod requires one control box.