See us on:
Visit CP on Facebook Visit CP on Twitter Visit CP on YouTube
Is your boat in the gallery?
Image Gallery  
Instructions & Guides:
Instructions  
Find Parts by Mercury Model:
OEM Part Finder  
What's on sale today?
Sale Specials  
What are you looking for Today?

Need Help? Call Us:

1-800-225-9871

Outside the USA? Call 707-585-9871

Discount Dock - Fuel Systems

Replacement Coalescing Fuel Filter Element
Your Price:
$40.00

1/2" NPT Fuel Filter Head

692-K3926

Fram Fuel/Water Filter / Separator Head

  • Available: (1) One
  • Made by Fram

10 Microns Water Separating Fuel Filter Kit ¼" (Contains: 700-24942, 700-25010)
Your Price:
$50.00

10 Microns Water Separating Fuel Filter Kit ¼" (Contains: 700-24942, 700-25010)

615-700-24957

10 Microns Water Separating Fuel Filter Kit ¼" (Contains: 700-24942, 700-25010)

  • Missing 1/4" NPT plugs or extension tubes
  • Sold As Is
  • (1) One Available

ø 1/4” NPTF Ports Flow: 50 GPH

 

    GLM Fuel Filter Features:
  • 28 or 10 micron filter paper shaped into 70 pleats total 327 sq. in. filtration. The largest filtering capability in the aftermarket.
  • BWG #11 heavy duty spring.
  • Gasoline resistant rubber seals
  • Oxidizing treatment inside powder coated outside for corrosion protection.
  • Minimum 196N.m. torgue strength between adapt plate and canister
  • Will not separate 2 cycle oil from gasoline!

2" Aluminum Flush Style Fuel Fill Carbon Fiber
Your Price:
$40.00

2" Aluminum Flush Style Fuel Fill Carbon Fiber

615-125-FGF-3501CF

2" Aluminum Flush Style Fuel Fill Carbon Fiber

  • Carbon Fiber Hydro Dipped
  • (1) One Available

These great looking fuel fills are extremely low profile. Each cap features unique finger grips on the perimeter of the cap allowing easy removal and installation. All mounting hardware is covered when the cap is installed.

    Each cap features :
  • an O-ring seal
  • a 2" hose connection
  • and is vented.

Height 2-3/16" x Width 3-1/2" Overall, Inner Dia. 1-15/16", Outer Dia. 2"


2IN SCREW TOP FUEL FILL
Your Price:
$39.99

2" Blue Screw Top Fuel Fill

615-5629

2 inch Blue Screw Top Fuel Fill

  • Powdercoat Blue
  • Minor scratches
  • (1) One Available

2" Polished Aluminum Flush Style Fuel Fill
Your Price:
$50.00

2" Polished Aluminum Flush Style Fuel Fill

615-125-FGF3501P

2" Aluminum Flush Style Fuel Fill

These great looking fuel fills are extremely low profile. Each cap features unique finger grips on the perimeter of the cap allowing easy removal and installation. All mounting hardware is covered when the cap is installed.

    Each cap features :
  • an O-ring seal
  • a 2" hose connection
  • and is vented.
Condition: Some deep scratches that can be polished out and re-coated.

2" Screw Top Fuel Fill - Blue
Your Price:
$39.99

2" Screw Top Fuel Fill - Blue

615-4124

2 inch Blue Screw Top Fuel Fill

  • Available: (1) One
  • Condition: New
  • Old Style, No Longer Carried
  • Powdercoat Blue

2-Wire Fuel Level Sender
Your Price:
$50.00

2-Wire Fuel Level Sender

615-105-91380

2-Wire Fuel Level Sender
Refurbished fuel level sender already cut to 8-5/8" depth

  • With a double tube design, this sender measures the amount of air trapped between the tubes providing you accuracy you can't get from float style senders
    • For use with 240-33 ohm gauges
    • (240 ohm empty and  33 ohm full)
  • Will work for gasoline or diesel fuel

NOTE: This sender can only be trimmed to a minimum 6".

This sender will NOT work with digital gauges. These senders will not work with dual station or two gauges trying to read from one sender. It is designed for analog type marine fuel level gauges. Use the 3-wire sender for digital gauge applications.

IMPORTANT: This sender must be re-calibrated if trimmed. THEY DO NOT auto calculate full and empty! See Instructions. The senders auto calibrate to type and grade of gas used.


8" OD x 3-3/4" Tall Aluminum Arrestor - Dented
Your Price:
$50.00

8" OD x 3-3/4" Tall Aluminum Arrestor - Dented

615-85083A

8" OD x 3-3/4" Tall Aluminum Arrestor - 5-1/8" Flange. These units feature large 8" OD construction. The large diameter gives the flame arrestor the ability to pass more air through it than the small units above, making this the choice of boaters seeking more power from their engines. These units also feature 3" tall mesh flame suppression screens assuring your safety. This particular unit has a small dent in edge (circled in picture). Only one available. Non-Returnable.


Blue 2" Billet Flip Lid Fuel Fill
Your Price:
$60.00

Blue 2" Billet Flip Lid Fuel Fill

615-125-3520B

Blue 2" Billet Flip Lid Fuel Fill 

  • Available: (1) One
  • Minor abrasions
These low profile style billet fuel fills use an integrated flip-up style lid that aids in opening and closing the fuel fill. The cap is threaded and screwed into the inner flange covering all mounting hardware. Each cap is vented with a small drilled hole and features an O-ring seal and a 2" hose connection. The vent hole is threaded and can be plugged with a pipe plug (not included) if desired.

Height 2-1/2" x Width 3-1/2" Overall, Inner dia. 1-5/8", Hose Dia. 2"

Custom Painted Mercruiser Intake/Throttle Assembly for 454/502 MAG
Your Price:
$750.00

Custom Painted Mercruiser Intake/Throttle Assembly for 454/502 MAG

615-5751

Used.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Edelbrock C454 Intake
Your Price:
$200.00

Edelbrock C454 Intake

615-5741

Used.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


GM Aluminum Intake, Square Port
Your Price:
$200.00

GM Aluminum Intake, Square Port

615-5744

Used.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


GM Intake, Oval Port BBC, Rusty
Your Price:
$150.00

GM Intake, Oval Port BBC, Rusty

615-5750

Used, a lot of surface rust, square bore carb.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Mercruiser Intake EFI Lower Only for 454/502 Mag
Your Price:
$650.00

Mercruiser Intake EFI Lower Only for 454/502 Mag

615-5745

Used.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Mercruiser Intake/Throttle Assembly for BBC, Square Port Heads
Your Price:
$750.00

Mercruiser Intake/Throttle Assembly for BBC, Square Port Heads

615-5740

Used.

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Mercruiser Throttle Body
Your Price:
$75.00

Mercruiser Throttle Body

615-5734

Polished housing, no hardware, sold as shown, stiff probably needs new bearings. Older 502 MPI

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Mercruiser Throttle Body Red with Hardware
Your Price:
$250.00

Mercruiser Throttle Body Red with Hardware

615-5735

Red Housing, has some hardware attached, sold as shown. 502 MPI

  • Available: (1) One
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Pair of Turbo Housings
Your Price:
$150.00

Pair of Turbo Housings

615-5727

Pair of unknown make turbo housings.

  • Available: (1) One Pair
  • SOLD AS IS
  • NON RETURNABLE

Please study photo carefully, item is sold as shown.


Replacement Coalescing Fuel Filter Element
Your Price:
$25.00

Replacement Coalescing Fuel Filter Element

615-625-7661

Replacement Coalescing Fuel Filter Element

  • Available: (6) Six
  • 7-3/4" tall
  • Fits 625-7660 Extreme SS Filter Head
  • These may have paint scratches or imperfections

Stainless Steel 90 Degree Fuel Vent
Your Price:
$15.00

Stainless Steel 90 Degree Fuel Vent

615-620-1025

Stainless Steel 90 Degree Fuel Vent

One (1) Available

These stainless steel fuel vents offer an almost completely flush finish leaving no protruding hardware. Each vent comes complete with nut and backing plate. This vent is perfect in harsh corrosive environments.