NOTE: These pages are from an older version of our website, kept up in order for old links to continue functioning. All information on this page may be outdated. See main website or call us for more information

cpperformance

CP Performance Boaters Shopping and Product Info Guide
Home ]< Previous Page ] Product Category ] Next Page > ]

1-800-225-9871

Mayfair's Full Hydraulic Steering Systems

hardin marine logoMayfair by Hardin Marines Innovation has once again brought to the performance powerboat and recreational sport boat industry a steering revelation with its all new modular wing plate steering system. By using 21st century manufacturing techniques. Mayfair by Hardin Marine has developed a superior 316L Stainless modular wing plate steering mount.

This wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together forming a strong bridge like cradle that provides the ability to mount the wing plate to the boats key attachment points. The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing. This arrangement gives additional support for even tighter, firmer steering control.

Best of all there is no disassembly of your outdrives rear end cap (Voids Factory Warranties) and these new systems fit all generations of Bravo outdrives including the new "Slope Back" style. Generally speaking, it is recommended to use external powersteering on boats which run in excess of 70 MPH, however there are some boats that run 60 MPH that would benefit from the use of external power steering.

Available in standard or narrow width 19.5" or 15.5" off crank centerline cylinder mounting.

    The Mayfair Full Hydraulic Steering System includes:
  • Power Steering Cap
  • description
  • Power Steering Banjo Fitting
  • Power Steering Reservoir Tank
  • 4" Steering Column
  • Hydraulic Steering Helm Box
  • -6 High Pressure Hydraulic Hose
  • Polished Stainless Steel Steering Ram(s)
  • Polished Stainless End Cap
  • Stainless Thru-Hull Fittings
  • Stainless Bolt Kit
  • Hi-Pressure Power Steering Filter
  • Stainless & Brass Fittings
  • Installation Instruction Manual
We are constantly asked which system is "best" and "why"? Well, all of the systems listed here are of the very best inquality. What separates them in many cases is very minor features such as fitment options or how complete the kit is. Some manufactures provide the bare minimum and save through the use of possibly rubber lines, aluminum components instead of stainless steel, etc. At the end of the day what makes a great steering system is "Value" all of these systems will meet your needs and some will just leave a big chunk of your money ($$$$) still in your wallet. Compare and save. "NO ONE" can save you more money on your new steering system better than we can.

Click on the part number to check pricing or place an order.

Mayfair Marine
Full Hydraulic Steering Kits

full hydraulic steering kit

install view one

install view two
Installed View

Part No. Description Ram Mounting Location
137-9402 Dual Bravo/Dual Ram 17-3/4" from the side of the Gimbal Housing
137-9405 Dual Bravo/Dual Ram 9" from the side of the Gimbal Housing
137-9401 Single Bravo/Dual Ram 17-3/4" from the side of the Gimbal Housing
137-9404 Single Bravo/Dual Ram 9" from the side of the Gimbal Housing
137-9400 Single Bravo/Single Ram 17-3/4" from the side of the Gimbal Housing
137-9403 Single Bravo/Single Ram 9" from the side of the Gimbal Housing
TRS Full Hydraulic Steering Systems
description

This Mayfair system is an economical alternative to the full hydraulic power system. External steering cylinders tie in to the Mercury control valve on the inner transom plate and the stock steering cable and helm are retained. All Mayfair systems have heavy-duty 316L stainless steel Mayfair rear mount end caps for the hydraulic stainless cylinders attachment.

    This system comes with:
  • all pre-made braided hoses
  • stainless fittings
  • mounting hardware
  • installation instructions
  • the inside kit to make a fully hydraulic system from your helm to the outdrive.

Part No. Description
137-9285 Mayfair TRS Dual (Twin) Drive, Dual Ram
137-9284 Mayfair TRS Single Drive, Dual Ram
137-9283 Mayfair TRS Single Drive, Single Ram


Add On Kits
Mayfair Single Bravo/Single Ram Hydraulic Steering Kit
description

  • Polished Stainless Steel Hydraulic Cylinder(s)
  • Polished Stainless Steel End Cap
  • Stainless Bolt Kit
  • All Pre-made Stainless Steel Braided Hose Assemblies
  • One Piece Stainless Thru-Hull Fittings
  • Stainless Steel Fittings
  • Installation Instruction Manual

Part No. Ram Mounting Location
137-9410 17-3/4" from the side of the Gimbal Housing
137-9413 9" from the side of the Gimbal Housing
Mayfair Single Bravo/Dual Ram Hydraulic Steering Kit
description

  • Polished Stainless Steel Hydraulic Cylinder(s)
  • Polished Stainless Steel End Cap
  • Stainless Bolt Kit
  • All Pre-made Stainless Steel Braided Hose Assemblies
  • One Piece Stainless Thru-Hull Fittings
  • Stainless Steel Fittings
  • Installation Instruction Manual

Part No. Ram Mounting Location
137-9411 17-3/4" from the side of the Gimbal Housing
137-9414 9" from the side of the Gimbal Housing
Mayfair Dual Bravo/Dual Ram Hydraulic Steering Kit
description

  • Polished Stainless Steel Hydraulic Cylinder(s)
  • Polished Stainless Steel End Cap
  • Stainless Bolt Kit
  • All Pre-made Stainless Steel Braided Hose Assemblies
  • One Piece Stainless Thru-Hull Fittings
  • Stainless Steel Fittings
  • Installation Instruction Manual

Part No. Ram Mounting Location
137-9412 17-3/4" from the side of the Gimbal Housing
137-9415 9" from the side of the Gimbal Housing
TRS Add-On Hydraulic Steering System
description

The new Mayfair add-on system is an economical alternative to the full hydraulic power system. External steering cylinders tie in to the Mercury control valve on the inner transom plate and the stock steering cable and helm are retained. All Mayfair systems have heavy-duty 316L stainless steel Mayfair rear mount end caps for the hydraulic stainless cylinders attachment. This system comes with all pre-made braided hoses, stainless fittings, mounting hardware and installation instructions.

Part No. Description
137-9277 Single Drive, Single Ram
137-9278 Single Drive, Dual Ram
137-9279 Dual (Twin) Drive, Dual Ram