Polished Remote Bulkhead Mount Thermostatically Controlled Engine Oil Filter Mount
Remote Mount
Thermostatically Controlled Engine
Oil Filter Mount
Maintaining proper engine oil temperature has become critical to the success or failure of today’s performance marine engines. Prolonged use of marine engines in conditions where oil cannot reach its optimum working temperatures will result in sludge formation and crankcase dilution which leads to excessive wear especially in the cylinder bores and bearing surfaces. A thermostat assembly combats this by permitting 90% of the engines oil to bypass the cooler during warm up. The balance of the oil flow is allowed to flow through the cooler maintaining constant pressure and preventing air pockets while eliminating cold oil shock. This reduces scuffing and premature wear and inhibits engine blow-by. As engine oil temperature reaches its optimum operating temperature moisture and impurities that often cause a milky condition are eliminated.
With this unit all oil temperature is now controlled through a integral 212 degree oil thermostat. The large -12 O-Ring style port fitting oil
inlets/outlets assure the maximum amount of oil can be flowed through the unit. Accepts either FRAM *HP4 / HP6 style Oil Filter *
Starting From:
$1,999.99
This Part has options, please click the button below to order.
Mayfair Electronics by Hardin Marine and Marine Design Corp have teamed up to bring the new generation of the Heads-Up indicator system to the marine industry. This new heads up indicator system does away with cables and converts digital electronic signals to operate actuators on the display. Carbon Fiber cover plates with powdercoated bezels in multiple colors. Indicators come standard with black sticks with engraved white writing. Optional LED lit clear lexan sticks with black writing are an available options.
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
An in‑line fuel filter located under cowl on outboard engines. Fits: the 4/5 hp. 2‑cycle (1999 & newer), the 4/5/6 hp. Four Stroke (1999 & newer), the 8/9.9 hp. Four Stroke (2005 & newer) and the 15/20 hp. Four Stroke (351cc,2008 and newer)
Your Price:
$9.00
This Part has options, please click the button below to order.