Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Place Diverter Replacement Nozzle Only - Berkeley 12JC, 12JG Pumps

Place Diverter Replacement White Nozzle Only - Legend Pump

Place Diverter Replacement Black Nozzle Only - Legend Pump

IMCO Extreme Advantage HP Gimbal Without Steering

Now you can eliminate the weak link in your drive train and run without the worry of mechanical failure. The HP Gimbal Housing gives your drive the strength it needs. Check these IMCO, HP Gimbal super features:

• The HP Gimbal Housing uses a thicker than stock casting.
• The HP helmets have been beefed up in all critical areas including the pin locations that are normally prone to failure.
• The HP Gimbal lower swivel pin is 40% stronger than original.
• The HP Gimbal has a removable bearing pack for easy maintenance.
• The HP Gimbal nameplate can be simply unscrewed for access to the upper swivel shaft nut, without removing the housing from the transom.

Self-Retracting Double Step Boarding Ladder, Polished

This ladder features a double step folding down 34" into the water. The ladder comes with a non-slip, all black rubber sleeve providing grip and protection. It is constructed of 304 stainless steel material with 1" diameter tubing. Comes completely assembled. Mounting hardware and easy step by step instructions are included.

Dimensions: 11" x 34", Width 11-1/2", Depth 22", Drop 34"

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.

Self-Retracting One-Step Ladder

This ladder is designed to mount under any swim platform or can be mounted flat/vertically on any transom with no or with minimal platform. The ladder can be made any size to fit boats with a limited mounting area. Ladder is constructed of 304 stainless steel material with 1" diameter tubing. It features a non-slip, all black rubber sleeve providing grip and protection. Comes completely assembled, ready for installation.

Maintenance: To ensure the best operation of your aqua step, Aqua Performance recommends that you hose off your step after every use, as you would the rest of your watercraft. To remove sand build up: You will need to remove the side caps and use a hose to spray water inside the spring mechanism while moving the step up and down. When finished rinsing, we recommend and use Prolong Oil as a lubricant onto the spring. Replace caps and bolts to ensure a proper fit.

Dimensions:12-1/2" Width x 12" Drop

• Aluminum Billets: 1" Counter Sunk Allen Screws, washers & nylon insert lock nuts.
• Solid Anodized Billet: 1" Button Head Screws with washers & nylon insert lock nuts for drill & tapping, must use lock tight.
• Fiberglass or Teak Platforms; Solid or Open Slot: 2" Carriage Bolts with washers and nylon insert lock nuts. Cut to desired length.
• All Integrated Platforms: Backing Plates with 2" Machine Screws, washers, nylon insert lock nuts.

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.

Wear Ring, Size Standard (SD 312)

Water Circulating Pump replaces MerCruiser part # 884727

Chevy Inline 4 and 6 Cylinder. 153 CID-2.5 LITRE, 181 CID-3.0 LITRE, 250 CID-4.0 LITRE

Features Include:
• Machined Brass Impeller
• Bi-Directional & Balanced
• Stainless Steel Seal Cup & Spring
• Stainless Steel Backing Plate
• Epoxy Painted Pump Housing
• Stainless Banded Ceramic Seal Seat