200 Foot Pound Bottom Mount Starter - Fits Both Small & Big Block Chevy Engines
This is the best choice for highly modified engines or where heat soak or space limitation is a concern. 200 lbs. of torque. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression. Machined Billet Block Adapter, Clears Most Oil Pans.
USCG Approved (SAE J1171)
Starting From:
$7.99
This Part has options, please click the button below to order.
T-bolt clamps are the very best clamp money can buy. They are virtually impervious to harsh elements and are super-strong. If you want the best, use T-bolt clamps. Available in many sizes from 1" to 6"
100-720-1000, use with 1" hard wall hose
100-720-1060, use with 1-1/4" hard wall hose
100-720-1120, use with 1-1/2" Fuel Fill hose
100-720-2000, use with 2" Fuel Fill hose
100-720-2120, use with 2-1/2" Water or Exhaust hose
100-720-3000, use with 2-7/8" and 3" Exhaust hose
100-720-3120, use with 3-1/2" Exhaust hose
100-720-4000, use with 4" Exhaust hose
100-720-4120, use with 4-1/2" Exhaust hose
100-720-5000, use with 5" Exhaust hose
Starting From:
$9.99
This Part has options, please click the button below to order.
Tough lightweight hose that is a sure bet for racers and performance enthusiasts. It's versatile, flexible, easy to cut and assemble with a number of attractive characteristics including: excellent temperature resistance -40 degree to +300 degree F, high tube strength, tight bend radius capable of tight engine compartments. 3-ply construction consists of full coverage Nylon-bonded outer braid for abrasion-resistance, partial coverage embedded braid middle layer, and CPE synthetic rubber inner tube for great flow and high temperature resistance. XR-31 Hose is made in the USA and offers a significant weight-savings over stainless steel braided hose. Because today's fuels can contain a wide variety of unpublished additives, it is not possible for us to accurately predict compatibility of the inner liner of XR-31 hose with any specific fuel. We recommend HS-79 Teflon-lined hose, if in doubt. XR-31 hose is NOT compatible with brake fluid. Shown with Black AN Hose adapter, which is not included. Temperature Range is -40°F to 300°F. See Specifications Tab for Max Pressures
XR-31 Nylon Braided Hose is Sold by the foot, i.e. add quantity 6 for 6ft. Of hose.
Hose comes in maximum of 25 feet sections. Please specify if you want sections cut into specific lengths when ordering over 25 feet.
"New" MSD Direct Fit Spark Plug wire set for Mercruiser 496HO, 496MAG, and 8.1L Standard Replaces #84-881698, 8M0117678
This MSD spark plug wire set has been custom built to replace the stock inferior OEM wire set found on Mercruiser's 8.1L 496 series of engines. Each spark plug wire is manufactured from MSD 8.5MM Helicore performance wire and provides 10X the spark energy of OEM wire sets. By delivering more spark to the spark plug efficiency and performance are achieved. Here's an example of how powerful these wires are. Multi-angle Spark Plug boots and terminals installed adjustable from 180 to 45 degrees to tailor fit perfectly for Marine Exhaust System and headers applications.
Independent testing of the Custom MSD wire vs the Mercruiser OEM wire showed nearly a 400% increase of energy transmission to the spark plug....Testing of two wires of identical lengths, identical temperature, identical ends...
Features
Copper alloy conductor has a resistance value of less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
Forty feet of conductor is wound into a single foot of wire for high EMI suppression
Conductor core features Dupont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
This scoop features heavy duty .080 aluminum construction providing durability and strength. Each scoop is welded inside and out to prevent cracking. Then the scoop is polished to a show quality shine that is just incredible. It also features a raised mounting flange providing plenty of clearance for any carburetor. Flame Arrestor 690-573001A is recommended for use with this scoop. Fits carburetors with 5 1/8 neck. Please provide center to center measurements when ordering. 12" Wide at opening. 6-1/2" tall in the middle, 4-1/2" tall on the sides. 28" Long
Your Price:
$599.99
This Part has options, please click the button below to order.
4500 Dominator Tall Aluminum Stealth Dual Air Scoop
This scoop features heavy duty .080 aluminum construction providing durability and strength. Each scoop is welded inside and out to prevent cracking. Then the scoop is polished to a show quality shine that is just incredible. It also features a raised mounting flange providing plenty of clearance for any carburetor. Fits carburetors with 7 1/4 neck. 13-1/2" Wide at opening. 6-1/2" tall in the middle, 4-1/2" tall on the sides. 28" Long.
This fits 4500 Dominator carbs only and that a center to center measurement is required to make purchase.
Your Price:
$18.84
This Part has options, please click the button below to order.