Oil Cooler - 2" Diameter, 9" Overall Length, 1-1/4" Hose Connection

• 3/8" NPT oil connections
• 1/8" NPT drain
• Operating pressure of up to 150 PSI.
• Replaces Mr Cool MRC205EE-05, Seakamp 25134, R&D Enterprises RD205EE-05, Sen-Dure 1125-12-S

High Torque - Top Mount Starter, Counter Clockwise Rotation

Hardin Marine introduces the new High Torque, Top Mount Starter. This starter features 5 full roller bearings, and a heat dissipating solenoid designed to eliminate the “hot start” syndrome. It features a 9 tooth pinion gear. Fits applications with a 4" center to center mounting hole dimension. The sealed drive assembly prevents debris from entering the starter motor. Counter Clockwise Rotation. This reliable starter will have your boat turning over every time for years to come. Needs .040-.100 clearance between the edge of the starter gear to the edge of the flywheel when the starter is not engaged. The starter gear should use 90% of the ring gear when the starter is engaged.

• 4 to 1 gear reduction
• 1.4KW/ 1.9HP

USCG Approved (SAE J1171)

Please Measure Before Ordering:


• Short: For engines that have 1.75 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.


• Long: For engines that have 2.20 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.


• Dual Cooler Bellhousing: For engines that use the Hardin Marine 755-8054 Dual Cooler Bellhousing Kit and that have 2.13 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.

• Polished Billet Aluminum Construction.
• 1/4" NPT female pipe thread on the inlet and outlet.
• Easy Manual Control of water flow through headers.
• 4 Positions.

Polished Aluminum LS, Small & Big Block Chevy Bellhousing / Flywheel Cover

This is a fabricated billet style bellhousing traditionally used with plate style engine mounts. The high quality construction allows attachment of drive guards and covers. The bolt center to center diagonally across the opening is 6-1/2"

Push / Pull Switch - 2-Position (On-Off) One-Circuit Switch

These are high quality brass switches available in four different models. The switches require a 3/8" hole for mounting.

Side mount bow lights that are flush mounted in the hull of your boat. Sold in pairs. Measures 7-3/4" Long by 2-3/8" Tall. Light Fixture is 3" Deep

Clear Anodized Billet Manual Fuel Valve Assembly

At last a fuel valve you're not trying to hide. This clear anodized billet fuel valve is something everyone would be proud to own. 1/2 NPT Ports. It has left tank, right tank, both tanks, and off for setting. Measures 2-3/4" X 2-3/4" X 2-1/4" deep

Note: This valve is not USCG approved.

5/8" Stainless Steel Straight Fuel Vent

These stainless steel fuel vents offer an almost completely flush finish leaving no protruding hardware. Each vent comes complete with nut and backing plate. This vent is perfect in harsh corrosive environments. Flange O.D. is 1.820".

5/8" Stainless Steel Right Angle Fuel Vent

These stainless steel fuel vents offer an almost completely flush finish leaving no protruding hardware. Each vent comes complete with nut and backing plate. This vent is perfect in harsh corrosive environments.

2-position Off/Push to On

These switches are perfect as starter buttons or can be used in just about any momentary type operation. Each switch features brass construction with a chrome plated nut and button for good looks. There is also a moisture repellent rubber cap sold separately.