NOTE: These pages are from an older version of our website, kept up in order for old links to continue functioning. All information on this page may be outdated. See main website or call us for more information

cpperformance

CP Performance Boaters Shopping and Product Info Guide
Home ]< Previous Page ] Product Category ]

1-800-225-9871

Flywheel Housings With Built-In Oil Coolers

Click on the part number to check pricing or place an order.

Keith Eickert
Dual Cooler Flywheel Housing Kits


flywheel housing kit

keith eickert logoThis is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further. Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.

The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated. Torsional strengthing ribs have been added for unmatched strength and durability. This is a common failure point in a factory style bellhousing on high horsepower applications. Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options. The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.

    Kits include:
  • a dual cooler flywheel housing
  • high-flow multi-plate oil coolers
  • oil cooler cover plates
  • cooler adapter nuts
  • stainless steel hardware
Oil plumbing sold separately.

Part No. Description
755-8053 Dual Cooler Flywheel Housing (Bellhousing Only, No Cooler Kits)
755-8054 Dual Cooler Bellhousing with 13 Plate Port Cooler and 8 Plate Starboard Cooler
755-8060 Dual Cooler Bellhousing with Dual 8 Plate Coolers
755-8059 Dual Cooler Bellhousing with Dual 13 Plate Coolers
755-8057 Dual Cooler Bellhousing with 15 Plate Port Cooler and 8 Plate Starboard Cooler
Keith Eickert
Extreme Duty Bravo Style Oil Cooler Flywheel Housing Assemblies

housing assembly

Yet another industry first from the guys at Keith Eickert Performance Products. This all new Extreme Duty Bravo Flywheel Housing solves numerous problems that have plagued engine builders and boaters since the introduction of the Bravo style outdrive by incorporating an engine mounted oil cooler within the engines flywheel cover. Now all of the engines oiling system components can be directly attached to the engine. No more stringer mounted coolers or extended length hoses required. But the best part is the fact that this unit uses the superior plate style of oil cooler making it the ultimate choice for high performance applications.

The oil coolers chamber features 1" NPT water inlets and is hard coat anodized for maximum corrosion protection. Each kit includes the appropriate high flow multi-plate cooler, cooler cover plate, adapter nuts and hardware. Oil plumbing sold separately.

Part No. Description
625-8050 Flywheel Housing Assembly Only (No Cooler Kit)
625-8051 Flywheel Housing Assembly with 8 Plate Cooler Kit
625-8052 Flywheel Housing Assembly with 13 Plate Cooler Kit
625-8053 Flywheel Housing Assembly with 15 Plate Cooler Kit
Keith Eickert
Oil Cooler Covers For Mercury Racing Flywheel Housings

merc racing flywheel housing


merc racing flywheel housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Part No. Description
755-8037 8 Plate Billet Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing
755-8006 8 Plate Cast Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing
755-8005 13 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing
755-8007 13 Plate Billet Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing
755-8019 13 Plate Billet Oil Cooler Cover, Port Side For KE or Mercury Flywheel Housing
755-8036 15 Plate Billet Oil Cooler Cover, Port Side For KE or Mercury Flywheel Housing
625-8024 Oil Cooler Installation Shim Kit (Included in Complete Flywheel Housing Kits)
625-8017 Oil Cooler Cover Replacement Gasket For Mercury Flywheel Housing - Port Side
625-8018 Oil Cooler Cover Replacement Gasket For Mercury Flywheel Housing - Starboard Side

Billet High Flow AN Cooler Jam Nuts
cooler jam nuts

At last an answer to the restriction problem commonly caused by pipe thread style fittings with a plate style cooler. A standard pipe thread fitting uses the internal threads of the cooler while drastically reducing the orifice size severely limiting flow and volume. These new billet AN adapter cooler fittings provide two distinct features, first these fittings attach to the external threads of the coolers inlet and outlets providing 100% unrestricted oil flow and secondly they take the place of the steel locking jam nuts providing a positive o-ring seal eliminating those old leaking corroded steel nuts.

Part No. Description
625-8072 -8 AN Oil Cooler Jam Nut/Adapter Fitting
625-8071 -10 AN Oil Cooler Jam Nut/Adapter Fitting
625-8070 -12 AN Oil Cooler Jam Nut/Adapter Fitting
625-1124 Replacement O-ring for Jam Nut/Adapter Fitting

Stainless Steel Xtreme Duty Multi-Plate Oil Coolers
multi-plate oil cooler

Our parallel multi-plate stainless steel oil coolers are the very best cooler available in the market today. Plate style coolers are unmatched in heat transfer providing maximum temperature reduction consistently while offering little to no pressure drop associated in other designs. The stainless construction offers superb corrosion resistance.

Part No. Description
625-8011 8 Plate Stainless Steel Oil Cooler
625-8012 13 Plate Stainless Steel Oil Cooler
625-8014 15 Plate Stainless Steel Oil Cooler
Oil Cooler And Oil Cooler Cover Plate Kits
oil cooler cover plate kit

Once again these kits are designed for your ordering convenience.

    Each kit consists of:
  • single oil cooler
  • cover plate
  • choice of stainless steel oil cooler
  • billet jam nuts
  • bolts and gaskets.

Part No. Description
755-8021 8 Plate Stainless Steel Oil Cooler with Cast Aluminum Mercury Style Cover
755-8020 13 Plate Stainless Steel Oil Cooler with Cast Aluminum Mercury Style Cover (Port)
755-8027 13 Plate Stainless Steel Oil Cooler with Billet Aluminum Mercury Style Cover (Port)
755-8022 13 Plate Stainless Steel Oil Cooler with Billet Aluminum Hardin Marine Style Cover (Stbd)