Golden Eagle Marine Jet Drive:
Click on the part number to check pricing or place an order.
| 1 | 1 | Suction Piece No. 5737 | 160-04-2282-01 |
| 2 | 1 | Wear Plate No. 5533 Ni-resist | 160-08-2243-13 |
| 3 | 1 | Wear Plate O-ring | 160-47-0178-01 |
| 4 | 2 | Dowel Pin | 160-14-1773-07 |
| 5 | 1 | Cooling Water Tube | 160-31-0804-01 |
| 6 | 1 | Grease Fitting | 160-23-0562-03 |
| 7 | 1 | Inspection Cap No. 5764 | 160-51-0494-01 |
| 8 | 1 | Inspection Cap O-ring | 160-47-0248-07 |
| 9 | 3 | Suction Piece Stud | 160-14-0576-08 |
| 10 | 7 | Nut | 160-14-0727-06 |
| 10.1 | 11 | Washer | 160-14-0740-41 |
| 11 | 4 | Inspection Cap Bolt | 160-14-0743-06 |
| 12 | 4 | Snap Ring | 160-14-1594-04 |
| 13 | 8 | Mounting Bolt | 160-14-1296-21 |
| 14 | 1 | Bearing Cap No. 4910 | 160-08-2399-07 |
| 15 | 4 | Bearing Cap Bolt | 160-14-1295-14 |
| 16 | 1 | Bearing Cap Lip Seal | 160-10-1320-09 |
| 17 | Impeller Adjustment Shim .031 | 160-14-0829-03 | |
| 17.1 | Impeller Adjustment Shim .015 | 160-14-1903-00 | |
| 18 | 1 | Retaining Ring | 160-14-0767-07 |
| 19 | 1 | Thrust Bearing | 160-08-2202-12 |
| 20 | 1 | Thrust Bearing Washer | 160-14-1762-00 |
| 21 | 1 | Lip Seal | 160-10-1345-00 |
| 22 | 1 | Seal Housing No. 5765 | 160-10-1387-09 |
| 23 | 2 | Seal Housing O-ring | 160-47-0233-04 |
| 24 | 1 | Mechanical Seal | 160-10-1043-05 |
| 25 | 1 | Retaining Ring | 160-14-0801-05 |
| 26 | 1 | Impeller Shaft | 160-07-5756-08 |
| 27.1 | 1 | Impeller B Cut No. 4906 | 160-05-3224-09 |
| 27.2 | 1 | Impeller C Cut No. 4906 | 160-05-3225-08 |
| 27.3 | 1 | Impeller D Cut No. 4906 | 160-05-3226-07 |
| 27.4 | 1 | Impeller E Cut No. 4906 | 160-05-3227-06 |
| 27.5 | 1 | Impeller F Cut No. 4906 | 160-05-3228-05 |
| 27.6 | 1 | Impeller G Cut No. 4906 | 160-05-3229-04 |
| 27.7 | 1 | Impeller H Cut No. 4906 | 160-05-3230-01 |
| 27.8 | 1 | Impeller K Cut No. 5657 | 160-05-3346-02 |
| 28 | 1 | Impeller Key | 160-23-1403-04 |
| 29 | 1 | Impeller Nut | 160-23-1491-07 |
| 30 | 1 | Bowl No. 4905 | 160-04-2202-08 |
| 31 | 2 | Bowl Bearing | 160-23-1423-00 |
| 32 | 1 | Bowl Bearing Lip Seal | 160-10-1260-19 |
| 35 | 1 | Grease Fitting | 160-23-0560-13 |
| 36 | 6 | Bowl Bolt | 160-14-0731-00 |
| 37 | 8 | Lock Washer | 160-14-0722-01 |
| 38 | 1 | Deflector No. 4997 - No Longer Available | 160-52-0374-05 |
| 39 | 2 | Nyliner Bearing | 160-08-2245-03 |
| 40 | 1 | Deflector Bottom Pivot Pin | 160-51-0203-03 |
| 41 | 1 | Retaining Bolt | 160-14-1269-16 |
| 42 | 1 | Tiller Arm Extension | 160-51-0500-03 |
| 43 | 1 | Trim Pivot Assembly | 160-51-0205-01 |
| 44 | 1 | Trim Screw | 160-14-0809-07 |
| 45 | 1 | Castle Nut | 160-14-0803-03 |
| 46 | 1 | Cotter Pin | 160-14-0712-03 |
| 47 | 1 | Trim Cap | 160-51-0208-08 |
| 48 | 1 | Trim Cap Gasket | 160-13-0370-07 |
| 49 | 6 | Trim Cap Bolt | 160-14-1772-08 |
| 50 | 1 | Trim Set Screw | 160-14-0717-08 |
| 51 | 1 | Reverse Gate No. 5766 | 160-52-0372-07 |
| 52 | 2 | Nyliner Bearing | 160-08-2196-02 |
| 53 | 2 | Reverse Gate Pivot Pin | 160-52-0280-08 |
| 54 | 2 | Retaining Bolt | 160-14-1268-09 |
| 55 | 3 | Lock Washer | 160-14-1895-00 |
| 56 | 1 | Cable Pin | 160-52-0293-03 |
| 57 | 1 | Cable Pin Fit. Washer | 160-23-1503-03 |
| 58 | 2 | Nyliner Bearing | 160-08-2298-09 |
| 59 | 1 | Cable Pin Retaining Ring | 160-14-1504-11 |
| 60 | 2 | Locknut | 160-14-0392-00 |
| 60.1 | 1 | Tiller Arm Ext. Bolt | 160-14-0580-02 |
| 61 | 1 | Tiller Arm No. 5767 | 160-52-0371-08 |
| 62 | 2 | Tiller Arm Bolt | 160-14-1297-12 |
| 62.1 | 2 | Lock Nut | 160-14-1922-07 |
| 63 | 1 | S.S. C-Wsh Cablelock 33 | 160-23-1502-04 |
| 63.1 | 1 | 330 Packing - No Longer Available | 160-23-2223-00 |
| 64 | 1 | Cable Lock Plug | 160-22-1995-09 |
| 65 | 1 | Rudder No. 4998 | 160-52-0290-06 |
| 66 | 4 | Rudder Bolt | 160-14-1268-09 |
| 67 | 4 | Lock Washer | 160-14-0721-02 |
| 68 | 4 | Nut | 160-14-0725-08 |
| 69 | Bottom Pivot Washer | 160-14-1856-07 | |
| 70 | 1 | Trim Plate | 160-51-0497-08 |
| 71 | 2 | Machine Screw | 160-14-1556-00 |
| 72 | 2 | Locknut | 160-14-0263-06 |
| 73 | 2 | Machine Screw | 160-14-1404-04 |
| 74 | 1 | Grill Insert | 160-51-0496-09 |
| 75 | 4 | Grill Insert Machine Screw | 160-14-1404-04 |
| 76 | 2 | Nytite Seal | 160-14-1893-02 |
| 77 | 2 | Bowl Stud | 160-14-0341-02 |
| 78 | 2 | Nut | 160-14-0727-06 |
| 80 | 1 | Aluminum Plug | 160-31-0672-00 |
| 81 | 1 | Cable Gland Assembly 1/2" NPT | 160-23-1408-09 |
| 101 | 1 | Steering Tube | 160-51-0431-07 |
