< Previous Page ] Product Category ] Next Page > ]

Gil Marine Exhaust Systems:

Gil Exhaust Systems perform better because they're made better, with great attention to detail in design, engineering and manufacturing.  These manifolds are Gilcoated inside and out, proven to protect better than conventional marine coatings.  These exhaust pipes are designed to keep cooling water separated from the exhaust flow to avoid corrosion of valves, rings and pistons.  And these exclusive patented Turbulator Rings have proven themselves in protecting engines against water ingestion due to condensation.

Gil Exhaust Systems are the overwhelming choice of boaters who want top-end performance with durability.  These exhaust systems deliver by allowing your engine to breathe easier and perform better.  Boaters spend thousands of dollars to modify their engines to increase horsepower and speed.  But, unless the exhaust system is capable of the additional flow required, the modifications are wasted.

In fact, Gil Exhaust Systems perform so well that Mercury Hi-Performance, the world's largest producer of high performance marine engines, feature Gil Wet Offshore Systems.

Click on the part number to check pricing or place an order.

Gil Marine Exhaust Systems
Gil Wet Offshore

Gil Marine Offshore Wet Systems are designed for hi-performance and stock engines.  This system mixes and discharges exhaust gasses with cooling water at the end of the exhaust pipe, and then a rubber hose connects up to your exhaust thru-hull ports.  Custom pipes are also available for custom installations and are priced by measurements given.  This same system is also used on Mercury hi-performance 525SC and HP500-engine packages as standard equipment from Mercury Hi-Performance.

Part No. Description
420-901018-SD Big Block Bravo Wet System
420-901016-SD Big Block TRS Wet System
420-901018-80 Big Block Custom System
Gil Marine Exhaust Systems
Magnum Choice

This is the easiest bolt on system for increasing horsepower and performance.  The kit includes shift, electrical and oil filter brackets for easy installation.  This system fits all MerCruiser small and big block Chevy engines equipped with MerCruiser Silent Choice systems.  This system will save up to 75 lbs. in weight over cast iron systems.  All manifolds are coated and built for power and long life.

Part No. Description
420-901030-POL Big Block Chevy Magnum Choice with Polished Risers
Gil Marine Exhaust Systems
Dry Offshore Series
The dry exhaust system is designed for ultra hi-performance engines, especially those with high overlap cams.  The water jacketed pipes extend through the transom and keep the exhaust gasses dry all the way to the end.  More and more competitive offshore racers are using the Gil Offshore Dry System.
Part No. Description
420-901014-SD Big Block Bravo Standard System
420-901012-SD Big Block TRS Standard System
420-901010 Big Block Custom Dry System
Gil Marine Exhaust Accessories
Replacement Manifolds
All popular Gil manifolds are available. Sold in pairs and come complete with bolts, gaskets, and water inlet plumbing.
Part No. Description
420-901180-GB Big Block Chevy Manifolds
Gil Marine Exhaust Systems
Manifold To Riser Water Transfer Hose
How old are your transfer hoses? Is it time to replace them? Don't get caught without spares. Although this hose offers years of service, it is unique to this exhaust system. Maintain these products for years of trouble free service.
Part No. Description
420-906500 1" Molded Hose for Gil Manifolds to Pipe
Gil/Hardin Marine Exhaust Systems
Shift linkage, Oil Filter & Module Brackets


(Oil Bracket Pictured)

These brackets are the same units included in our popular Gil Exhaust Kits and provide easy installation of our factory accessories.
Part No. Description
620-32505

Gil /Hardin Electrical/Shift Cable Bracket for Mercury (Fits Both)

620-32500 Gil /Hardin Oil Bracket Offshore for Mercury (Fits Both)
Tailpipe Wedges
By Hardin Marine
These are used to correct tailpipe angles when systems are changed from one boat to another. A simple life saver when you just need your pipe a little one way or the other. Manufactured from 6061-T6 and hard anodized aluminum.
Part No. Description
620-907080

1/8" x 3/16" Tailpipe Wedge

620-907090 1/8" x 1/4" Tailpipe Wedge
620-907100 1/8" x 1/2" Tailpipe Wedge
620-907110 1/8" x 3/4" Tailpipe Wedge
Gil Marine Exhaust Systems
Gaskets & Turbulators
 

Turbulators are designed to keep any condensation or moisture from entering the manifold during the cool down process. This is one of the many unique Gil features that are helping lead the way in exhaust system technologies. Original quality Gil gaskets are the finest anywhere. Their graphite impregnated core assures long life.
Part No. Description
420-907060 4.0" Offshore Turbulators
420-907070 4.5" Big Gun Turbulators
420-906321 Std Gil Manifold to Riser Gasket
420-906330 Big-Gun manifold to Riser Gasket
300-1410 Manifold to Engine Gasket Big Block Chevy
300-1404 Manifold to Engine Gasket Small Block Chevy