462-38-44513 Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1" x 3/4"
|
|
462-38-40105 1 X 4 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1" dia.", Length: 4"
|
|
462-38-40100 1 X Close Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1" dia.", Length: Close (1-1/2)
|
|
462-698-LV1215 Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps. Hose: 1", 1-1/2"
|
|
462-698-LV1218 Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps. Hose: 1", 1-1/8"
|
|
462-37-7060510 Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 1" IPS Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-37-7010510 Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 1" IPS Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-114-02089910 For mounting from inside transom. Fully adjustable, creates waterproof seal and will not leak or jar loose under vibration. Corrosion resistant construction. Designed for use with Moeller drain tubes. All come with neoprene seal. Material: Brass, Fits: 1", Case: 6
|
|
462-38-44205 1" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1" NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-IBV1000BSPP Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 1", A: 2.79", B: 5.93", C: 2.48", D: 1.47" Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water. 1-1/4" and larger valves include a zerk fitting for easy lubrication or draining.
|
|
462-379-00IS100 Cast bronze w/nut. Pipe: 1", Stem: 2-1/2", Base: 2-3/4" x 3-3/4" Cast bronze with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-9-0834006PLB Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS. Connector: 1", Hose: 90° , Height: 6-3/8", Flange: 4-3/8" dia., Bolt: 3/8" Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. *Overall height is measured from the top of the hose adapter to the bottom of the flange. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
|
|
462-379-00BBV100LP Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle. Pipe: 1" IPS
|
|
462-9-0493006PLB Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hingled lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size. Pipe: 1", Size: 9-1/2" H x 5-1/2" W, Cylinder: 4-1/2" x 5-1/2", Ratio: 20:1 Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hingled lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-9-0065DP6PLB Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 1", Max Hull Thickness: 2-1/2" Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-STH100W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 1", A: 2.85", B: 1.05", C: 4.00", D: 3.05" Includes locking nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-284-MC6654G Hot dip galvanized. Orange painted screw pins. Bulk. Size: 1", Max Load: 8-1/2 ton
|
|
This Part has options, please click the button below to order.
495-122 1" shaft log rebuild kit
Fits: the 495-211 box
|
|
462-37-7710510 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 1" IPS, Case: 5 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
780-1040
- 1" Slip-On
- Outer Diameter 1.97"
- Overall Length 3.84"
- Polished Stainless Steel.
- Stainless Steel main body and flange.
- Includes nut and gasket.
|
|
