Generic

"Ideal for bilge pump discharge hose, this hose also works for potable water tank fill and drain hose for sinks, showers, scuppers, and livewells. Clear FDA formula PVC w/vinyl helix. Flexible and abrasion resistant. Resistant to mild chemicals and salt water. Do not use glycol based antifreeze in hose. Do not attach to thru-hull fittings below the water line. For 1-1/2" couplings, use 147-1120 right hand thread cuffs."

ID: 1-1/8", Length: 50', Color: Black

Sold: Each

Brass 90° with female/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Sold: Each

Brass 45° with female/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1"

"Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut."

Hose: 1", Flange: 2-3/16", Max Hull Thickness: 1-7/8"

Sold: Each

Hold full-sized insulated drink holders and mugs
Includes stainless steel mounting screws
Flat or bulkhead mount

• Hold full-sized insulated drink holders and mugs


• Includes stainless steel mounting screws


• Flat or bulkhead mount

Description: 1 Drink holder, Color: White, Size: 4-5/8" x 3" x 4-5/8"

Sold: Each

For hot or cold pressurized water system supply, washdown pump connections, and head intake hose. Clear, extra heavy duty wall, polyester reinforced PVC. FDA formula vinyl. 50' Roll out cartons.

ID: 1", OD: 1-5/16", Length: 50'

Nickel plated brass. 12V, 180 mA. Water and corrosion resistant.

LEDs: 1, A: 1-1/4", B: 3/8", Watts: 0.5, Candle Power: 500, Case: 10

Sold: Each

Tank is intended for installation in any pumped water system controlled by a pressure switch and can serve as a storage vessel as well as a pulsation dampener. By smoothing water flow and reducing on/off switch cycling of the pump the result is quieter operation, and longer pump life. The even flow of water gives better control of hot water temperature with systems using instant water heaters. Snap fittings include both 1/2" barbed and 1/2" threaded fittings. Internal bladder. Pre-pressurized to 10 psi.

Capacity: 33 oz., Ports: 1/2" Hose Barb 1/2" Thread  Size: 13-1/4" x 4-3/4" Dia.

Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.

Hose: 1", Flange: 2-1/4" OD", Max Hull Thickness: 1-1/2"

Sold: Each

"Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"."

Hose: 1", Flange: 2-1/4", Max Hull Thickness: 1-3/4"

Sold: Each

"Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"."

Hose: 1", Flange: 2-1/4", Max Hull Thickness: 1-3/4"

Sold: Each

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1" x 1/2"

1 X 2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1" dia.", Length: 2"

Nipple Brass 1 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1" dia.", Length: 3-1/2"

1 X 3 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 1" dia.", Length: 3"