Deck & Dash Hardware - Keith Eickert

Oil Cooler Cover - 8 Plate Cast Aluminum (356-T6) Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

8 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets.

B/B Chevy Valve Spring Oiling System

Valve cover rails are a Keith Eickert exclusive product that has been designed to solve the problem of excessive valve train failure. Valve spring fatigue and failure cause by long duration engine operation at higher engine rpm’s. Valve spring oilers are an industry standard in many forms of professional motorsports. Now this system can easily be installed on nearly all big block chevrolet application to dramatically extend valve train life. The oiling rail is 3/8" thick and incorporates 8 precision oil metering spray jets that distribute additional oil towards the valve spring. Simple single oil inlets per rail provide ease of plumbing. Sold in pairs.

Big Block Chevy Billet Aluminum Deluxe MSD 6M-2 & Coil Cylinder Head Mounting Bracket

This beautifully finished billet aluminum mounting plate allows for the mounting of all popular round style MSD 8222 or 8200 series coils and a 6M-2 (6460) ignition boxe. The bracket bolts to the right or left hand side of a big block Chevrolet head. Fits on the front or the back of the engine.

Big Block Chevy 2-Piece Valve Covers w/Valve Spring Oilers (pair)

These valve covers are a Keith Eickert exclusive product that have been designed to solve the problem of excessive valve spring fatigue and failure caused by long duration engine operation at higher engine RPM's.  An industry standard in all forms of professional racing can now be added to your engine that will dramatically extend valve train life.  The oiling rail systems are available for both standard traditional valve covers as well as for the Keith Eickert 2-piece valve covers.  The oiling system ral measures 3/8" thick and incorporates eight precision-metered oil-spray jets that distribute additional oil towards each valve spring assembly.  Simple single oil inlets per rail provide easy plumbing.

• Multi-Layered Steel (MLS) Marine Exhaust Gaskets are designed for extreme duty applications as well as high cylinder pressures produced by high horsepower applications. Perfect for high compression, super-charged, or turbo-charged,engines.
  
• Manufactured from three 304 stainless steel layers, resists corrosion, will not burn through or push out and maintains maximum fastener torque retention
• Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads
• Withstands different combination's of cylinder head (aluminum) and exhaust header or manifold (steel) materials, will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel material

Sold Each

• Multi-Layered Steel (MLS) Marine Exhaust Gaskets are designed for extreme duty applications as well as high cylinder pressures produced by high horsepower applications. Perfect for high compression, super-charged, or turbo-charged,engines.
  
• Manufactured from three 304 stainless steel layers, resists corrosion, will not burn through or push out and maintains maximum fastener torque retention
• Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads
• Withstands different combination's of cylinder head (aluminum) and exhaust header or manifold (steel) materials, will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel material

Sold in Pairs

Big Block Chevy Supercharger Style EFI Induction Hat

So if your like thousands of other people who are just either tired of the driving habits of your carbureted supercharged engine or just want to try to stretch that huge fuel bill a little farther then we’ve got the answer. KE has developed this unique aluminum EFI injector scoop and throttle body to make your conversion away from carburetors easier than ever. By enclosing the fuel injectors inside the premium cast T356 aluminum scoop and adding a progressive throttle linkage billet throttle body you can now merely remove your carburetors and existing flame arrestor and install this system. This new unit will mount to all standard inlet roots style superchargers. Add the EFI computer or management system of your choice and you can atlas enjoy the luxury and drivability that only fuel injection can offer.

* Note additional wiring and plumbing is required. This kit includes Standard aluminum finish scoop, billet throttle body, mounting plate, fuel rails and stands, as well as quick a connect wiring plug.

Billet 4150 Standard Holley Regulator/Throttle Cable Bracket

This billet throttle cable mount is manufactured from 6061-T6 billet aluminum and black hardcoat anodized for both strength and corrosion resistance.  This single carb version offers a plate form to the side of the carburetor that a fuel regulator and plumbing can be attached for convenience.

Billet Aluminum Coil Mount for MSD Blaster SS Series Coils

Compact yet strong and easy to mount. That's what this all new billet coilmount does. Designed exclusively for the popular SS series MSD Coils. This coilmount can be mounted for or aft of any popular big block Chevy cylinder head.

Billet Aluminum Flywheel - Externally Balanced For Gen 4 Big Block Chevy

These all new Keith Eickert billet aluminum flywheels are manufactured from certified billet material that will not break up under stress and severe punishment of on and off throttle in high RPM marine environments.

These flywheels have machined retaining recesses every 120 degrees attaching locating tabs that have been installed on the ring gear making rear gear shift and movement a thing of the past. By using a lighter aluminum flywheel you will be rewarded with both faster acceleration and deceleration giving you the edge you're looking for.

• Billet construction
• Accepts Mercury couplers and heavy duty drive plates
• Multi-point ring gear attachment
• Lightweight yet durable
• Zero/neutral balance
• 168 tooth gear

Billet Aluminum Flywheel - Neutral Balance For GM Gen 4 Big Block Chevy

These all new Keith Eickert billet aluminum flywheels are manufactured from certified billet material that will not break up under stress and severe punishment of on and off throttle in high RPM marine environments.

These flywheels have machined retaining recesses every 120 degrees attaching locating tabs that have been installed on the ring gear making rear gear shift and movement a thing of the past. By using a lighter aluminum flywheel you will be rewarded with both faster acceleration and deceleration giving you the edge you're looking for.

• Billet construction
• Accepts Mercury couplers and heavy duty drive plates
• Multi-point ring gear attachment
• Lightweight yet durable
• Zero/neutral balance
• 168 tooth gear

Billet Aluminum Fuel Pump Mounting Bracket For Aeromotive Fuel Pump

Sometimes it’s the the extra touch that really turns any boat into a show piece, that's why Keith Eickert developed this super duty billet aluminum fuel pump bracket.. This bracket provides a solid secure mounting provision for many popular electric fuel pumps. The clamshell design uses individual mounting standoffs for adequate pump to mounting surface clearance.. This bracket features a 2.41" I.D. size.

Billet Aluminum Head Mount Coil Bracket, Polished

This billet aluminum coil bracket is designed for your big block Chevrolet and will fit on the right or left hand side of the cylinder head either in the front or back of the engine. Accepts all MSD Blaster 8200 series round coils or an 8207 Blaster SS coil.

Its always the tools that make every job a little easier and that’s just what these items will do for you. The lifting eyes provide a perfect , worry free, secure mounting point, to pick-up any engine. Includes 3/8" x 1-1/2" Bolts & Spacers.

Billet Flame Arrestor Mounting Nut, 1/4-20 Thread

This stylish billet aluminum knurled flame arrestor nut is the perfect addition to top off your carbureted engine. Manufactured from 6061-T6 billet aluminum and black anodized. Available in 1/4-20 for standard carburetors and 5/16-18 for Dominator carburetors.

Custom Dry Tailpipes for Keith Eickert Cast Aluminum Headers (Pair)

Note: This is a custom product, pricing published on the web is only used as a minimum guideline. Depending upon the length and number of bends your custom tailpipes require, the actual price may be significantly higher. You will be quoted the actual cost of your tailpipes after we receive your custom dimensions.

Custom Internal Flame Arrestor

Fits Big Block Chevy Supercharger Style EFI Induction Hat (Part #755-5980)