Stainless Steel Pop-Up Cleat, 4-1/2", 6" or 8"

All components are stainless steel. The cleat and housing are of 316 grade stainless. By pushing a button, the cleat springs up for use. By pushing down on the cleat it locks back into the recessed position. All pop up cleats include backing plate.

Pop-Up Cleat Cup - For 4-1/2", 6" & 8" Stainless Steel Cleats

These cups are designed as a water sealed under cover to prevent runoff water below the deck. Drain fitting uses 3/8" Hose. Used with 680-202-X style cleats.

Touch-N-Go Spring Loaded Cleat - 6" Pop-Up

These are the HOTTEST NEW cleats on the market today. Cast from 316L stainless steel, they are spring loaded and don't have any unsightly buttons to release, merely push on the top of the cleat and it will recess and then pop-up into position for use. Retraction is done in the same manner. Easy operation is just the beginning, these cleats have no exposed hardware, studs and water drains are cast into the base so there are no additional drain cups to buy. The best part is they're the easiest cleat of this type to install, just drill four holes, attach the nut and washer, hook up your drain hoses (if used) and your finished.

Slim-Line 4-1/2" and 6" Pull-Up Cleats

• Sleek narrow design allows installation where other flush-mount cleats won't fit.
• Easy to pull up - the recess in the base allows the cleat to be grasped quickly and easily.
• No separate waterproofing cup is necessary - each cleat can be completely sealed, or can be drained through a 1/2" diameter tube connected directly to the cleat base.
• Made of marine grade 316 stainless steel.
• 3/16" thick, stainless steel backing hardware is standard on all models and is included with each cleat.

Spring Loaded Billet Aluminum Mushroom Cleat

Our new Mushroom Cleats are clean in design and relatively low and smooth when not in use. To use, simply pull up on the spring loaded cleat head, insert a line, and let it go. The cleat head and base are machined out of 6061-T6 billet aluminum while the shaft, spring and snap ring are all stainless steel.

Spring Loaded Stainless Steel Mushroom Cleat

Our new Mushroom Cleats are clean in design and relatively low and smooth when not in use. To use, simply pull up on the spring loaded cleat head, insert a line, and let it go. This cleat is all stainless steel.

Stainless Steel Quick Release Pin Style Fender Cleats

These Stainless Steel Quick Pin Cleats are show quality. Designed for simple single hand operation will allow you to easily install and remove float style fenders. Sold each.

*** NOT INTENDED FOR MOORING ***

• Oversized Loops
• Made of Water resistant polyprolene
• Extremely Flexible & Resists Knotting
• Will not Mildew
• Floats
• Available in 15 and 20 foot lengths

• Oversized Loops
• Made of Water resistant polyprolene
• Extremely Flexible & Resists Knotting
• Will not Mildew
• Floats
• Available in 15 and 20 foot lengths